Vcds Lite Activation

VCDS-Lite-1.2-Full (1).exe: VCDS-Lite-1.2-Installer.exe: VCDS-Lite-1.2-Full.exe: VCDS lite 1.2 Full (Registered@amp;Activated).exe. In this video I will take you through how to start using VAGCOM/VCDS lite. Many people have an issue with the COM ports being correctly set up and I will tak.

In this video tutorial we will teach you how to set up / activate auto-lock & auto-unlock doors with VCDS (VAG COM) on your VW Golf Mk5, Jetta, Passat, Polo, Touran, Sharan, Skoda Octavia 2, Fabia, Seat Leon, Cordoba, Ibiza, etc. When the car reaches 15 km/h or 10 miles/h the doors will auto lock and it will auto-unlock when you take the key out the ignition. You can still use the lock and unlock buttons from the inner door panel.

But before that, you have to use a VCDS tester and a laptop with VCDS software already installed. Then…

1. Start the engine and connect the VCDS cable at the OBD2 port

2. Plug the VAGCOM (VCDS) cable into any USB port on your laptop

3. Open the VCDS software that you have already installed on your laptop

Follow this steps: Select Controle Module / 46-Central Conv. / Adaption-10 / Documented adaption channels can be selected here / Auto-Lock / New Value

At “New value” insert number 1 (“on”) or using the “Up” and “Down” (Dn) buttons and then click Test / Save / Yes

Then, turn buck to Documented adaption channels can be selected here / Auto-Unlock / New Value and insert number 1 (“on”) or using the “Up” and “Down” (Dn) buttons and then click Test / Save / Yes / Done, Go back / Exit.

Now, we will check if the set up was done correctly driving with a speed that is over 15 km/h or 10 miles/h.

See also these VIDEO TUTORIALS for VW:

What is VCDS?

VCDS (www.ross-tech.com)is short called “VAG-COM Diagnostic System ”,also called VAG-COM.VCDS is primarity used for diagnostic and adjustment for Volkswagen Group vehicle.VCDS will perform most of functions that only performed by expensive official dealers,it is very suitable for DIY user and garage.

VCDS Functions List:

Auto Scan

Control Unit Info

Read Fault Codes

Output Tests

Selective Output Tests

Basic Setting

Vcds Lite 1.2 Activated

Clear Fault Codes

Close Controller

Code Module

Code Slave Modules

Vcds Lite Activation

Measuring Blocks

Advanced Measuring Values

Single Reading

Adaptation

Login/Coding II

View Readiness

Guided Readiness Scripts

Security Access

Support Codes

Generic OBD-II

Freeze-Frame Data

Dual K-Line Support

Digit PINs (VAS only)

Vcds lite activation crack code

Code Database Up to Date

Diagnostics via CAN

Transport Mode

Support for Dual ECUs

Data Logging

HighSpeed DataLogging

Real-Time Graphs

Real-Time Gauges

Graphic TDI Timing Checker

Control Module Finder

Automate Service Reset (SRI)

ECU Mileage Checker

Controller Channel Maps

Wireless Connection via WiFI

Installation List

LT3/Crafter Support

VCDS Support Vehicle Models List:

The following VCDS Compatibility Charts are based on Model and Chassis Type. To find the Chassis Type for your car, look at the 7th and 8th digits of the VIN number. The Chassis type will usually be found in these digits. There are exceptions.

Example (Audi A6):

VIN: WAUZZZ4F36N111022

The 7th and 8th digits are 4F for Audi A6 (4F), the 10th digit is 6 which stands for Model Year (MY) 2006. See the Model information Column for Audi to find the A6 Model. Note that the Chassis Type “4F” is listed under that model. Look horizontally across the VCDS Compatibility Chart until you find the Model Year 2006 and you can determine which interface(s) is required for that Chassis. In this particular case you will see that only the HEX+CAN series interface is compatible.

Please Note: Older VCDS versions may not support all of the model years listed. These charts are intended for the most current version of VCDS (in rare cases even Beta Versions).

Check the VCDS Compatibility Charts to get details

VCDS Support Languages:

Česky,Chinese,Dansk,Deutsch ,Español ,Français,Italiano,Magyar ,Nederlands,Polski,Português,Romana,Russian,Svenska

VCDS software, free download

VCDS v.20.4.0.ENG

VCDSLoader_v9.2

Password: mhhauto

VCDS with Loader v9.2 – English 19.6.0, non-English (tested PL and HU)

VCDS 17.8 MULTILANGUAGE FULL.txt

Below download links are shared from some forum member,for newest software please go to original official website:https://www.ross-tech.com

In pack you will find:

  1. a) eeprom+firmware(2 types)
  2. b) hardware type detect program to know what to flash inside.
  3. c) flash interface by usb (interface with genuine firmware , must be connected to 12V)
  4. d) loader to be used with any genuine install kit
  5. e) info.pdf to read how to do stuff
  6. f) projects already made to flash by programmer (tl866 or usbasp)
  7. g) ept and xml files for ft232rl or rq just in case.

LOADER V2.txt

Update 14.08.2017

Loader V2 compatible with RL-RQ-BL-BM interfaces.

Reworked tool for update interface by USB – keeps count of type of hw in eeprom.

New eeprom dumps for each version of hardware

Vcds Lite Activation File

Included in pack Progisp v1.72 and also Mprog 3.5 with templates

Remade projects with new dumps for Progisp and TL866

All versions released until today on any language work even NEZ one 🙂

Vcds lite activation code

UPA VCDS FUSES for HW44 and HW46.zip

VCDS Loader V4.txt

New version with new eeprom, need to rewrite your interface with new usb flasher.

One multilingual eeprom is not possible anymore. Use VAGCOM_EEWriteLang to write eeprom of your choice.

VCDS Computer Requirements:

VCDS requires a computer running Microsoft Windows (the HEX-NET can be used with VCDS-Mobile on other platforms but that use is still in beta testing). A Laptop is most convenient but a desktop PC can also be used.
We recommend a PC running Windows 7, 8.1, or 10 with at least 2GB of RAM (single-core Atom-class processors are no longer recommended). Screen resolution of at least 800×600 is recommended.

How to Install VCDS Software:

Double click the icon desktop,wait for installing,as shown:

Wait for progress complete to 100%

Select “Next”

Check “I accept the terms of the License Agreement”

Select “Next”

Select components to install,then select “Next”

Wait for progress complete

Click “Finish”

How to use VCDS:

Vcds Lite Activator

Vcds Lite Activation

Run VCDS software,connect VCDS VAG COM to your computer USB interface

Click options

Vcds Lite Activation Hack

Click Test,show that VCDS VAG COM hardware has been activated

Then click save,you can use VCDS VAG COM to test your car

As shown,choose function you want

Vcds Lite Activation Crack Code

Vcds

Vcds Lite Registration

Readers who read this article also read: